Description: Recommended byVideo Introduction About this item【9.1 inch 6K Screen】ANYCUBIC Photon Mono X 6Ks resin printer uses a 9.1” 6K mono screen with a HD resolution of 5760*3600 and a high contrast ratio of 380:1, bringing sharper and delicate details. Comes with a high light transmittance anti-scratch film protector, effectively protecting the screen from wearing and scratches while ensuring printing accuracy. One free extra piece included for easy replacement.【Upgraded LighTurbo Matrix】The upgraded Anycubic LighTurbo matrix light source and high-precision textured optical lens provide a stable and even parallel light source, effectively removing optical layers and grid lines to create a smooth and delicate model surface. The max printing speed reaches 60 mm/h, completing your 3d printing models even sooner.【Stable Printing Sturcture】Photon Mono X 6Ks 3d resin printer adopts dual-linear Z-axis rail and highly wear-resistant POM anti-backlash nuts, restraining the Z-axis' stability to the micron level, effectively eliminating printing layers and ensuring printing details. Laser-engraved platform has better adhesion than sandblasting ones, greatly reducing fall-offs and warping-ups, bringing you an even better success rate.【Large Printing Dimension】The printing size of ANYCUBIC Photon Mono X 6Ks resin 3d printer is 195.84X122.4X200mm, so you can print small models in one batch to improve the printing efficiency. And the max printing volume is up to 4.76L, making it even more convenient for printing large-sized models.【Upgraded Slicer software】Anycubic Photon Workshop 3.0 brings you an even better slicing experience in punching, supporting, shelling and layout arranging. Simplified UI interface makes slicing easier. The new model repairing function also helps boost the printing success rate. Free to use permanently Tech SpecsMachine Weight8.5kg/18.7lb.Machine Dimensions417x290x260mm/16.4x11.4x10.2 in.(HWD) Printing Volume4.76L/161oz.Printing Dimensions 200x195.84x122.4mm/7.8x7.7x4.8 in. (HWD)Machine Leveling4-point manual levelingPrinting Speed15-60mm/hRemovable CoverEffectively block UV radiationResin TankUnibody design with scale lines ZaxisDual-linear Z-axis, 10μm precisionPrinting Platform Laser-engraved aluminum platformLarge Film Protector Replaceable anti-scratch film Exposure Screen9.1" monochrome screen6K (5,760 x 3,600 pixels) resolution380:1 Contrast Ratio6.5% light transmission2,000 hours lifespanLight SourceUpgraded Anycubic LighTurboMatrix light sourceControl Panel 3.5-inch TFT touch control Data Input USB Type-A 2.0 Power Supply 80W rated power Power Button On/off switch In The BoxWash Station Specs (optional) Wash & Cure Machine 2.0Wash & Cure Machine PlusRated Power25W40WInput VoltageAC 110V/220V ±10%AC 110V/220V ±10%Machine Size225mm(L)*235mm(W)*365mm(H)290mm(L)*270mm(W)*479mm(H)Washing Size120mm(L)*74mm(W)*165mm(H)192mm(L)*120mm(W)*290mm(H)Curing Size140mm(D)*165mm(H)190mm(D)*245mm(H)Multiple Washing MethodsBasket washing & Hanging cleaningBasket washing & Hanging cleaningTime Selection1-60mins1-60minsSafe Auto-pause√√Weight3.7kg~6.5kgOtherReflectorL-shape Strip Light ReflectorPaymentDelivery detailsTerms of salesAbout usContactPayment1.We accept Paypal,Google Pay,CreditCard,Visa,MasterCard,etc.2.Payment must be within 8 days after you ordered the item.Delivery details1.We cannot arrange shipments on weekend or public holidays.2.Your orders will be shipped out within 1-2 business days after payment received.3.If there is any question about delivery details,please contact us, we're alwasys at your service. Terms of sales1.The returns should be returned with our original packages. 2.Defective products must be returned within 30 days. 3.Customers must contact us first for the return address. 4.In all cases, buyers pay for the shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. 5.Please kindly feel free to contact us first, if you receive the items with quality problems or damaged, we would like to offer replacement or refund service for you. About us Who are we? Founded in 2015, Anycubic has become one of the most popular 3D printer brands in the market, with around 300 employees based in China.But, we didn’t start fancy as it seems to look today."Graduated in 2015, I came back to China from New Zealand. I was so excited and full of curiosity when landed in Shenzhen the first time”, James , co-founder of Anycubic and a Ph.D of University of Auckland said. "Lu Ouyang, Anycubic’s Founder and CEO, is my childhood friend. He had a company before Anycubic providing electronic modules and 3D printer accessories for over 4 years.3D printer itself wasn’t our first choice. We hadn’t even had the confidence to rush in. But after seeing clients increasingly relying on us for key components of their DIY printers, We realized we could do it, and do it much better.”“I didn’t think much but only hope to explore more possibilities with the 3D printing technology. There is nothing to be afraid of. So why not make a difference.” Ouyang added. In 2015, Anycubic was founded, without much hesitation. “Following our heart is important. But the real world is harsh. There were so many up and downs. We cannot remember how many sleepless nights out there at the early stage.” Anycubic founders said. After a whole year’s hard work, the 1st model Anycubic Mega came on board in2016. Fortunately our work paid off. Mega became so popular in the market in a short period of time and our journey as a professional 3D printer maker officially started. We all were amazed and excited but we did not stop there. The second and third generations were launched soon after along the way..Indeed, 3D printing technologies can do a lot. But first of all we believe 3D printers should be accessible and affordable to all instead of being rocket science and beyond budget. We believe each one of us deserves the freedom to make our ideas, creativity and imagination a reality. Anycubic is committed to being one of the best choices for freedom to make. 3Dream, for freedom to make, Side by side with you, we know we will make it. For Freedom to Make 3D Printing Education Incubation Project Inspired by Anycubic' s vision — "For Freedom to Make" — the project is the company' s 3D printing education incubator founded in Shenzhen on September 2, 2020. It demonstrates Anycubic' s aspiration of helping everyone achieve the freedom of creation and invention using 3D printing technologies. Deemed Anycubic' s first high-tech 3D printing incubator, the project aims to support 3D printing basic research and training, and create a 3D printing education ecological circle to encourage more people to explore the applications of 3D printing in different areas. Support will include 3D printing products, printing services and consultancy, among others. Incubated partners will hail from various sectors including but not limited to universities, research institutes, and enterprises. This project indicates Anycubic's perseverance in exploring the 3D printing world and boosting the development of innovation in the economy and society. Addressing the barriers to STEM education will require a collective effort from both institutions and 3D providers, in which we leverage effectively our resources to initiate four 3D printing camps this summer. The first camp ceremony was held at Yale School of Engineering and Applied Science on April 23 followed by 3 online boot camps known as "ANYCUBIC X Yale Funbotics 3D Modeling and Printing Camp". Guided by Yale mentors, in all boot camps, the students will learn about the inner workings of 3D printers and how to 3D model as well as 3D print their creations. The Bigger Picture with Education Incubation Project Promoting 3D printing education and research is a marathon not a sprint. The partnership with Yale Funbotics is Anycubic' s first port of call and the company will continue to work hard to sponsor cooperation with more global universities, research institutes, enterprises, and academic organizations of a global nature and help them achieve success in exploring the world. Contact us via ebay Contact1.Your Positive feedback will be an encouragement for us to offer the better quality and the better service in future.2.If you are not satisfied with them, please contact us first via Contact Seller. Your messages will be answered within 18 Hours.3.We shall try our best to solve your problem to your satisfaction.On Apr 10, 2024 at 05:24:51 PDT, seller added the following information:
Price: 269 USD
Location: NJ/CA
End Time: 2024-08-10T09:04:14.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: ANYCUBIC
Model: Photon Mono X 6Ks
Nozzle Size: No
Item Height: 475mm
Item Length: 270mm
Item Width: 290mm
Country/Region of Manufacture: China
3D Technology: LCD
Features: Adjustable Layer Thickness, DIY Kit
Interface: USB 2.0
MPN: Photon Mono X 6Ks
Maximum Resolution: 5760*3600 6k
Maximum Print Size: 195.84x122.4x200mm
Printing Speed: 15-60mm/h
Manufacturer Warranty: 1 Year
Machine size : 11.4 x 10.2 x 16.4 inches
Machine weight : 8.5kg/18.7lbs
Leveling: Leveling 4-point manual leveling
Light Source: Anycubic LighTurbo Matrix light source