HELIX C FOUR 4x220w + C ONE 1100w Mono High-Res Audiophile Sound Quality NEW

Description: HELIX COMBO HELIX C FOUR 4x100w RMS High-Res Audiophile Ultimate Sound QualityHELIX C ONE 1100w RMS @ 1-Ohm Monblock Subwoofer Amplifier HELIX C FOUR Audiophile sound quality combined with impressive output power The C FOUR is a high-end 4-channel amplifier that has been designed down to the last detail for ultimate sound quality. Audiotec Fischer’s proprietary ultra low-noise and ultra low-distortion Class A driver stage feeds a total of 32 hand-selected MOSFET power transistors, resulting in an incredible damping factor of 1,000 for relentless control of every loudspeaker. The intelligent regulation of the power supply assures stable conditions for the output stages and therefore phenomenal output power independent of the cars battery voltage. In combination with the optionally available digital input module HDM 2, the C FOUR demonstrates the perfect transition to the digital era. The HDM 2 accepts digital audio signals up to 96 kHz sampling rate via its two optical inputs followed by cutting-edge BurrBrown D/A converters with 32 Bit resolution that transform the signals back to the analog domain. Therefore the C FOUR is absolutely future-proof and perfectly prepared for the combination with our digital signal processors. Features § Extremely broadband Class AB amplifier with eight selected MOSFET transistors per channel for exceptional sound quality - ideal for High-Resolution audio § Ultra low-noise and distortion-free power amp drivers in Class A technology § Enormous damping factor of 1,000 @ 4 Ohms for perfect speaker control § Optionally available HELIX Digital Input Module (HDM) to extend the amplifier with two optical digital inputs in SPDIF format § Integrated, active crossover with highpass, lowpass and bandpass § Regulated DC / DC switching power supply with Start-Stop capability down to 6V supply voltage § Microprocessor-based monitoring of amplifier status including temperature-dependent fan control § Input Mode switch for flexible routing of the input signals § Cutting-edge BurrBrown D/A converters with 32 Bit resolution in combination with the optional HDM 2 module § Massive 24-carat gold-plated power and speaker terminals § Quad-layer PCB with extra-solid 70μ copper traces for lowest possible losses and SMD (Surface Mounted Device) manufacturing technology Technical data Output power RMS ≤ 1% THD+N - @ 4 Ohms 4 x 150 Watts - @ 2 Ohms 4 x 220 Watts - @ 1 Ohm - - bridged @ 4 Ohms 2 x 440 Watts - bridged @ 2 Ohms - Max. output power per channel* Up to 250 Watts RMS @ 2 Ohms Amplifier technology Class AB Inputs 4 x RCA / Cinch 1 x Remote In Optional via HDM 2 module: 2 x Optical SPDIF (28 - 96 kHz) Input sensitivity RCA / Cinch 1 - 8 Volts Input impedance RCA / Cinch 7.5 kOhms Input impedance highlevel - Outputs 4 x Speaker output Output voltage RCA / Cinch - Signal converter for digital input - Frequency response 10 Hz - 80,000 Hz Bass boost - Highpass 15 Hz - 4,000 Hz adjustable Lowpass 15 Hz - 4,000 Hz adjustable Bandpass 15 Hz - 4,000 Hz adjustable Subsonic - Phase - Slope high- / lowpass 12 dB/Oct. Slope subsonic / lowpass - Signal-to-noise ratio digital input - Signal-to-noise ratio analog input 112 dB (A-weighted) Distortion (THD) < 0.007 % Damping factor > 1000 Operating voltage 9 - 16 Volts (max. 5 sec. down to 6 Volts) Idle current 2400 mA Operating temperature range -40° C to +70° C Fuse 3 x 30 A LP-Mini-fuse (APS) Additional features Active, adjustable crossover, HDM slot, input mode switch, High-Resolution audio, Start-Stop capability Dimensions (H x W x D) 37.1 x 430 x 240 mm / 1.46 x 16.93 x 9.45" HELIX C ONE The sound power house – extremely powerful and stunning sound quality The C ONE is a high-end 1-channel amplifier that is able to drive even powerful subwoofers to the max. The ultra low-noise and ultra low-distortion Class A driver stage feeds a total of 32 hand-selected MOSFET power transistors, resulting in an incredible damping factor of 1,000 for relentless control of every loudspeaker. Additionally the intelligent regulation of the power supply assures stable conditions for the output stages and therefore phenomenal output power that is almost independent of the cars battery voltage. And for even more output power, two C ONE amplifiers can be combined to one single powerhouse – thanks to the TwinPower Link. Despite its impressive output power, the C ONE is by no means a pure subwoofer amplifier. Thanks to an extended frequency response up to 80 kHz and an architecture that has been designed down to the last detail for ultimate sound quality, the C ONE is also a perfect buddy for heavy-duty mid-woofers in audiophile system concepts. In combination with the optionally available digital input module HDM 1, the C ONE demonstrates the perfect transition to the digital era. The HDM 1 accepts digital audio signals up to 96 kHz sampling rate via its optical input followed by cutting-edge BurrBrown D/A converters with 32 Bit resolution that transform the signals back to the analog domain. Therefore the C ONE is absolutely future-proof and perfectly prepared for the combination with our digital signal processors. Features§ Extremely powerful Class AB amplifier with up to 1,100 Watts RMS @ 1 Ohm – a perfect match for all 2 x 2 Ohms subwoofers connected in parallel§ Also usable as an ultra broadband amplifier with exceptional sound quality – ideal for High Resolution Audio§ Ultra low-noise and distortion-free power amp drivers in Class A technology§ Enormous damping factor of 1,000 @ 4 Ohms for maximum speaker control§ Optionally available HELIX Digital Input Module (HDM) to extend the amplifier with an optical digital input in SPDIF format§ Regulated DC / DC switching power supply with Start-Stop capability down to 6V supply voltage§ Microprocessor-based monitoring of amplifier status including temperature-dependent fan control§ Integrated, active crossover with highpass, lowpass, bandpass, bass boost and phase control§ TwinPower Link for connecting two amplifiers in bridged mode§ Cutting-edge BurrBrown D/A converters with 32 Bit resolution in combination with the optional HDM 1 module§ Massive 24-carat gold-plated power and speaker terminals§ Quad-layer PCB with extra-solid 70μ copper traces for lowest possible losses and SMD (Surface Mounted Device) manufacturing technology Technical data Output power RMS ≤ 1% THD+N Normal operation (One amplifier) TwinPower Link (Two amplifiers) - @ 4 Ohms 1 x 525 Watts 1 x 1,660 Watts - @ 2 Ohms 1 x 830 Watts 1 x 2,200 Watts - @ 1 Ohm 1 x 1,100 Watts - - bridged @ 4 Ohms - - bridged @ 2 Ohms - Max. output power per channel* Up to 1,320 Watts RMS @ 1 Ohm Amplifier technology Class AB Inputs 2 x RCA / Cinch 1 x Remote In 1 x Remote control input 1 x TwinPower Link Input sensitivity RCA / Cinch 0.5 - 8 Volts Input impedance RCA / Cinch 7.5 kOhms Input impedance highlevel - Outputs 1 x Speaker output Output voltage RCA / Cinch - Signal converter for digital input - Frequency response 10 Hz - 80,000 Hz Bass boost 0 - 9 dB / 40 Hz - 120 Hz Highpass 15 Hz - 4,000 Hz adjustable Lowpass 15 Hz - 4,000 Hz adjustable Bandpass 15 Hz - 4,000 Hz adjustable Subsonic - Phase 0 - 180° adjustable Slope high- / lowpass 12 dB/Oct. Slope subsonic / lowpass - Signal-to-noise ratio digital input - Signal-to-noise ratio analog input 120 dB (A-weighted) Distortion (THD) < 0.006 % Damping factor > 1000 Operating voltage 9 - 16 Volts (max. 5 sec. down to 6 Volts) Idle current 2400 mA Operating temperature range -40° C to +70° C Fuse 3 x 30 A LP-Mini-fuse (APS) Additional features Active, adjustable crossover, bass boost, HDM slot, input mode switch, TwinPower Link, Start-Stop capability Dimensions (H x W x D) 37.1 x 430 x 240 mm / 1.46 x 16.93 x 9.45"

Price: 2799 USD

Location: Yakima, Washington

End Time: 2024-08-25T03:38:36.000Z

Shipping Cost: N/A USD