R-Cpipe Straight Apple Blast Finish Bent Acrylic Cumberland Like R Saddle Stem

Description: THIS PIPE COMES WITH EIGHT 9mm MOLINA ACTIVATED CHARCOAL FILTERS AND A 9mm to 3mm ADAPTER. SMOKE IT WITH OR WITHOUT FILTERS WHAT ARE REVERSE CPIPES??? Reverse Cpipes are my attempt to provide a well made quality smoking pipe for the pipe smoker not the Artisan Pipe Collector. Reverse Cpipes are European Made Factory Pipes I have purchased directly from the manufacturer. These pipes may have a fill or 2, the finish may not be perfect and there may be a Stummel flaw here and there but the briar quality is good, the drilling is good, the Stem fit is good and the draw is not restricted. In short, Reverse C pipes should provide the owner with a good reliable smoke for a long time. My hand made pipes are branded with a C on the left side of the shank. After I am satisfied that a factory pipe is of good smoking quality, I brand it with a C that is Reversed or Backwards… Thus “Reverse Cpipe”. Sorry, But I don’t accept offers on Reverse Cpipes because after I import them, pay eBay, pay shipping and sell the pipe for less than $50, I make very little profit on these pipes. My price is already set as low as I can go!!! I have made & sold over 400 Cpipes (please look at my reviews). I know what makes a good pipe but many people don’t want a hand made pipe that costs over $100 they want a New Unsmoked pipe for around $50 that smokes good. I am offering Reverse Cpipes to fill this niche. PIPE DESCRIPTION: New & Never Smoked Straight Apple with Slightly bent Stem. Sand Blast Red/Brown Stain Flush Mount Stem, end of stem has a black, red & brown ring. Stem is an Acrylic Round Saddle Stem that is Red/Black Swirl made to look like a Cumberland Stem. Stem is slightly bent. Delrin Tenon that holds a 9mm filter or a 9mm to 3 mm adapter to use if you don’t like filters. Factory Black Bowl Coating. Coating is made using ash/alcohol suspension (per the manufacturer). Coating will wash out with ever-clear or maybe some bourbon if you don’t like bowl coatings. Bowl Drilling Is Centered & on the Bottom of the Bowl Good Open Draw Stem has a good snug fit in the tenon My Observations About This Pipe: Initially the stem had a slight light gap, I fixed this issue by sanding down the end of the Tenon about 1/16”. Additionally there is a filling at the top left of the bowl rim (best seen in photo 10). Please look closely at the photos and the pipe dimensions below to ensure you will be satisfied with this pipe. IF YOU HAVE ANY QUESTIONS PLEASE MESSAGE ME. I WILL ANSWER TO THE BEST OF MY ABILITY. STUMMEL DIMENSIONS: Overall Length- 6.25” Bowl Height- 2.1” Bowl OD-1.7” Bowl ID- 0.75” Bowl Depth - 1.7” Pipe Mass- 2.18 oz / 61.7 g

Price: 39.5 USD

Location: London, Arkansas

End Time: 2024-09-08T19:06:37.000Z

Shipping Cost: 6 USD